Mounting Accessories

The Thunderpole 3/8" Wingnut Swivel Adaptor is an adaptor that allows 180° adjustment to a 3/8" antenna.

An adaptor that fits between the antenna and mount and allows you to adjust the angle of your antenna up to 90 degrees.
Compatible with 3/8" antennas.
 

A spring loaded fitting that fits between the antenna and mount and allows you to quickly disconnect your antenna.
Compatible with 3/8" antennas.

A spring loaded fitting that fits between the antenna and mount and allows you to quickly disconnect your antenna.
Compatible with 3/8" antennas.

A spring that fits between the antenna and mount and gives much more flexibility.
Allow you to mount a standard 3/8" antenna onto the stud (male) commonly found on the roof of Volvo and Scania trucks.

A spring that fits between the antenna and mount and gives much more flexibility.
Compatible with 3/8" antennas.

A heavy duty spring that fits between the antenna and mount and gives much more flexibility.
Compatible with 3/8" antennas.

A heavy duty spring that fits between the antenna and mount and gives much more flexibility.
Compatible with 3/8" antennas.

A radial kit to attach to any 3/8" antenna to improve the radiation pattern.
Fits between antenna and mount.
Compatible with 3/8" antennas.

Adaptor for attaching a standard 3/8" thread antenna onto a DV type base mount.

An adaptor that allows a DV antenna to be used on a 3/8" mount.

Used to attach DV fittings together, i.e. DV antennas to a DV mount.

This 3/8" Stud mount is designed to be attached through a hole in a metal bracket, i.e. through a gutter or mirror bracket.

This 3/8" Stud mount is designed to be attached through a hole in a metal bracket, i.e. through a gutter or mirror bracket.

A CB Radio antenna mount designed to fit through a small hole (e.g. on a gutter mount).
Compatible with 3/8" antennas.
Connection to radio is via a standard PL259 patch lead.

A whip adapter that fits between the antenna whip and mount.
Compatible with 3/8" antennas.

This adaptor will allow you to mount a standard 3/8" antenna onto the stud (male) commonly found on the roof of Volvo and Scania trucks. 

This adaptor will allow you to mount a standard 3/8" antenna onto the stud (male) commonly found on the roof of Volvo and Scania trucks.

M6 to M5 Antenna Adaptor for Volvo and Scania Trucks.

M6 Antenna Adaptor for Volvo and Scania Trucks.

M6 Antenna Adaptor for Volvo and Scania Trucks.

DV Antenna Adaptor for Volvo FH-4

A 25mm adapter to convert M7 female stud to M6 male.

An adaptor that allows you to use a 3/8" antenna on an SO239 mount.

A window clip mount with BNC connector. Comes complete with 2.4m RG 174/U coaxial cable and BNC plug.

Suitable for CB Radio, Amateur Radio and scanner antennas.

A window clip mount with SMA (Female) connector. Comes complete with 3m RG 174/U coaxial cable and SMA (Male) plug.

Suitable for CB Radio, Amateur Radio and scanner antennas.

Stainless steel antenna mount.

Stainless steel antenna mount.

Rubber cap designed to protect your antenna mount from corrosion once an antenna is removed.

Plastic cap designed to protect your antenna mount from corrosion once an antenna is removed.